Pressure Washing in Lakeland, FL
We clean house exteriors, driveways, pool decks, roofs and pool cages for Lakeland homeowners, using the pressure and cleaners each surface calls for.
- Free Written Estimate
- Fast Scheduling
- Built for Florida Weather
- Licensed & Insured
- BBB A+ Rated
- 150,000+ Customers Served
- 283+ 5-Star Reviews
Request Your Free Estimate
Tell us about your project and we will schedule a free estimate.
- Free No-Obligation Estimate
- Fast Response Times
- No Pressure Consultation

Lakeland’s mix of lakes, clay-rich soil and heavy summer rain leaves driveways, pool decks and screen enclosures with algae, mildew and tannin staining that plain hose water will not touch. Central Florida’s humidity keeps surfaces damp long after a storm passes, which gives mold a head start on stucco, concrete and aluminum screen frames throughout neighborhoods from Grasslands to South Lakeland.
We pressure wash and soft wash house exteriors, driveways, walkways, pool decks, lanais, roofs and pool cages, matching pressure and cleaning solution to the material. Concrete and brick pavers can take higher pressure; screen panels, soffits and shingles need a gentler soft wash so we do not strip paint, loosen mesh or damage roof granules while still removing the buildup.
Lakeland Weather and Algae Growth

Lakeland sits among dozens of lakes in Polk County, and the humidity that comes with them rarely lets surfaces fully dry between storms. Afternoon thunderstorms are routine from June through September, leaving pool decks, driveways and lanai screens damp well into the evening. That lingering moisture is exactly what algae and mildew need to take hold, especially on north-facing walls and shaded patios.
Homes near wooded lots or closer to lakefront areas tend to see heavier buildup, since tree cover blocks sun exposure and keeps surfaces cooler and wetter longer. Pollen in spring and oak leaf drop in fall add organic debris that feeds mildew growth on screen panels and pool cage frames. Over time this shows up as black streaking on stucco, green film on pool decks and a dull haze on aluminum.
Well water used for irrigation in many Lakeland neighborhoods also leaves iron and tannin stains on concrete and screen enclosures, which plain rinsing will not remove. Left alone, these deposits etch into porous surfaces like pavers and stucco, making future cleaning harder and shortening the life of paint or screen coatings on a pool cage.
Our Pressure Washing Process

We start by walking the property and identifying each surface type: stucco, concrete, pavers, shingles, metal roofing, screen enclosures and aluminum frames. Each one reacts differently to pressure and cleaning agents, so we note soft spots in concrete, loose screen panels, old paint, and any areas with heavy algae or rust staining before deciding on a plan.
Based on that assessment, we apply the appropriate pre-treatment, often a biodegradable cleaner formulated to break down algae, mold and tannin stains, and let it dwell before rinsing. Delicate surfaces like screen mesh, painted aluminum and shingles get soft washing with low pressure and the cleaning solution doing the work, while concrete driveways and pool decks can handle higher pressure to lift embedded grime.
After rinsing, we inspect the surface again to confirm staining is gone and nothing was damaged in the process, checking screen panels for tears and pool cage frames for any paint that may need touch-up. We also check nearby landscaping and walkways to make sure runoff and overspray are contained before we consider the job finished.
- Surface assessment: identifying stucco, concrete, pavers, screens, roofing and metal frames
- Pre-treatment: biodegradable cleaners applied to break down algae and tannin stains
- Method selection: soft washing for screens and paint, higher pressure for concrete
- Rinsing and runoff control to protect landscaping and adjacent surfaces
- Final inspection for remaining staining, screen damage or paint wear
Scheduling, Access and HOA Rules

Most Lakeland homes have fenced yards or locked lanai gates, so we confirm access ahead of time, including arrangements for gated communities off South Florida Avenue or around Lake Hollingsworth where a code or escort may be required. We also need an active water spigot on the property; if yours is shut off or the pressure is weak, we handle that during the walkthrough rather than the day of service.
Florida afternoon storms are routine from June through September, so we schedule morning starts and keep flexibility for same-week rescheduling if rain is forecast. Many Polk County HOAs and deed-restricted communities have guidelines on exterior cleaning frequency, acceptable runoff handling, or visible equipment, and we work within those rules rather than asking homeowners to seek exceptions.
- Confirm gate, yard and spigot access before the crew arrives
- Morning scheduling during summer storm season when possible
- Runoff directed away from landscaping beds and storm drains
- HOA documentation reviewed in advance when a community requires it
Avoiding Damage to Screens and Paint

Pool cage screening is thin aluminum mesh, and a wand set to driveway-level pressure will tear it or blow it out of the spline channel. We clean screens with low-pressure soft washing and the appropriate cleaning solution, letting the chemistry lift mildew rather than forcing water through the mesh at high PSI.
Painted aluminum frames and stucco walls face a different risk: pressure that is too high, or held too close for too long, can strip paint, etch stucco, or push water behind siding and screw holes. We adjust pressure and nozzle distance by surface, test on a small area first, and avoid chemicals that are incompatible with painted or powder-coated finishes, protecting work that may need repainting or rescreening later rather than sooner.
Process and Timeline
- Walk the property with the homeowner to identify surfaces, access points and problem areas
- Protect landscaping, outdoor furniture and electrical fixtures before starting
- Apply surface-appropriate cleaners to loosen algae, mildew and grime
- Soft wash screens and painted surfaces at low pressure, and higher pressure for concrete, pavers and driveways
- Rinse thoroughly and check for streaking, missed spots or drainage issues
- Walk the property again with the homeowner before considering the job complete
Most single-property pressure washing jobs in Lakeland are completed in half a day to a full day, depending on square footage and the number of surfaces involved.
Lakeland Pressure Washing FAQ
How often should a pool cage or lanai be pressure washed in Lakeland?
Most Lakeland homes do well with a wash every 12 to 18 months, though homes near lakes or with heavy oak tree cover often need it closer to the one-year mark because of pollen, algae, and dropped leaves. Screens and aluminum frames that sit damp under shade stay cleaner longer when washed on a regular schedule rather than waiting until buildup is visible.
Will pressure washing damage my pool screen or aluminum frame?
Full-pressure washing is too aggressive for screen mesh and can tear it or loosen spline, so we soft wash screens and frames with lower pressure and the right cleaning solution. Aluminum framing can handle moderate pressure for grime and oxidation, but we adjust nozzle and distance based on the panel's condition and age.
Can you pressure wash my roof without harming the shingles?
We soft wash roofs rather than using high pressure, since direct pressure can strip granules from asphalt shingles and shorten their life. Soft washing uses low pressure with a cleaning solution to remove algae and black streaking while leaving the roofing material intact.
Do you offer soft washing for stucco and painted surfaces?
Yes, stucco, painted siding, and soffits are washed with a soft-wash method using lower pressure and appropriate cleaners, which removes mildew and dirt without forcing water behind the surface or damaging paint. This is especially important on older Lakeland homes where stucco can be more porous or already have hairline cracks.
How long does pressure washing a driveway or pool deck usually take?
A standard driveway or pool deck typically takes one to three hours depending on size, surface material, and how much staining or algae is present. Decorative pavers or heavily stained concrete can take longer since they often need pretreatment before washing.
Do I need to be home, and how do you access a gated or screened pool area?
You do not need to be present as long as we have access to the pool cage, driveway, or exterior areas being cleaned, such as a gate code or an unlocked side gate. For HOA or gated communities in Lakeland, we coordinate access ahead of time so the crew can get in and out without needing anyone on site.
More Pool Cage Services in Lakeland
Beyond pressure washing, the same Lakeland crews handle pool cage painting and rescreening for homeowners looking to restore an aging enclosure. Pool Cage Painting and Pool Cage Rescreening.
Nearby Areas We Also Serve
Crews based in Lakeland also take on pressure washing and pool cage work throughout nearby Polk County communities. Bradenton, Sarasota, Tampa, Naples, Cape Coral and Fort Myers.
Statewide details, colors and the full process are on our main pressure washing page.
Recent Work



Request a Lakeland Estimate
Send a few photos of the area you want cleaned along with your Lakeland address, and we will put together a written estimate based on the surfaces and condition involved. You can also call (941) 320-2858 or use the form on this page to get started.
Last reviewed: November 4, 2026