Pressure Washing Martin County FL
We pressure wash and soft wash house exteriors, driveways, pool decks and screen enclosures for homeowners across Martin County, matching equipment and cleaners to each surface.
- Free Written Estimate
- Fast Scheduling
- Built for Florida Weather
- Licensed & Insured
- BBB A+ Rated
- 150,000+ Customers Served
- 283+ 5-Star Reviews
Request Your Free Estimate
Request a free written estimate for your property.
- Free No-Obligation Estimate
- Fast Response Times
- No Pressure Consultation

Martin County sits on Florida’s Atlantic coast, where salt air off the Indian River Lagoon and the ocean settles on exterior surfaces year-round. Homes in Sewall’s Point, Jupiter Island and along the Jensen Beach shoreline see faster buildup of salt film and oxidation on screens, railings and pool decks than homes further inland, which changes how often cleaning is needed and how aggressively a surface can be washed.
We have worked on cages across Martin County, from waterfront lanais in Stuart and Palm City to screened pool enclosures in Hobe Sound and Port Salerno. Our crews route through the county on scheduled days, bringing calibrated pressure washers for concrete and soft-wash systems for screens, stucco and roofing, so each surface gets the right method rather than one setting applied everywhere.
Salt Air and Algae Across the County

Humidity off the Indian River Lagoon keeps shaded screens and north-facing stucco damp longer after rain, which is why black mildew spreads fastest on cages in Palm City and North River Shores backyards shaded by oaks or set close to canals. Once mildew colonizes a screen panel, it spreads to adjacent panels and the cage frame within a season or two.
Communities closer to open water, including Jupiter Island, Sewall’s Point and the Jensen Beach riverfront, collect a fine salt film on screens, pool decks and lanai railings that plain rain does not rinse away. Left alone, that residue holds moisture against aluminum and paint, which speeds oxidation and chalking on cages and fascia. Inland toward Indianatown and Palm City, dust and pollen are the more common buildup, still dulling decks and screens over time.
Pool decks and walkways in Port Salerno and Ocean Breeze often sit low and shaded, so green and black algae take hold in the grout lines and broom-finished concrete faster than on open, sun-exposed pavers elsewhere in the county. A yearly or twice-yearly wash keeps that growth from staining permanently into the surface.
How We Wash Each Surface

Every job starts with a walk-around to note the cage screen condition, any loose or torn panels, the type of pool deck or paver surface, and areas where algae or rust staining has set in. This inspection determines pressure settings and cleaning solution for each surface before any equipment is turned on.
Screens and stucco are soft washed, using low pressure with a cleaning solution that lifts mildew and salt film without tearing screen mesh or stripping paint. Concrete, pavers and walkways get standard pressure washing, since those surfaces tolerate higher pressure and benefit from it to clear embedded algae from grout lines and pores.
Roofs are treated separately with roof-safe, low-pressure methods to protect tile and shingles, and every surface gets a final fresh-water rinse to remove cleaning residue. We also offer pool cage painting for Martin County homeowners who want the frame refinished after washing reveals chalking or scattered rust spots.
- Inspection of screens, deck, pavers, stucco and roof
- Pre-treatment with surface-appropriate cleaning solution
- Soft washing for screens, paint and stucco
- Standard pressure washing for concrete, pavers and walkways
- Full rinse and final walk-through
Scheduling, Access and HOA Rules

Most pressure washing jobs in Martin County are completed in a single day, though homes with a full exterior, roof, pavers and a large pool cage may run into a second day. We route crews across the county by area, so a Palm City appointment might be followed by work in Stuart or Jensen Beach the same week, which helps keep scheduling flexible for homeowners.
Gate codes, side-yard access and pet arrangements are worked out before the crew arrives, since most cages and pool decks are reached through a side gate rather than the front of the house. In gated communities and HOA neighborhoods, which are common from Palm City to Hobe Sound, we can provide a certificate of insurance or notify the property manager ahead of time if the association requires it.
Pools, landscaping and irrigation lines are covered or worked around before any cleaner is applied, and nearby plant beds are rinsed afterward if a chemical treatment was used nearby. In communities like Indiantown, where lots tend to be larger and further from the coast, scheduling is less about HOA paperwork and more about coordinating well pumps or private irrigation systems.
- Typical single-property job: half a day to a full day
- Gate and pet access confirmed before the crew arrives
- Pools and plant beds covered or protected during washing
- HOA notice or insurance certificate provided on request
- Crews route by area, so nearby communities are often scheduled the same week
Why Pressure Matters on Screens and Pavers

Pool cage screens are thin aluminum mesh, and full pressure from a washer wand will stretch, tear or blow out panels in seconds. We use low-pressure soft washing with a cleaning solution on screens, letting the chemical break down algae and grime rather than forcing water through the mesh, which protects panels that may already be 10 or more years old.
Pavers and concrete pool decks can take higher pressure, but the wrong technique still causes damage: uneven passes etch lines into the surface, and too much pressure strips sand from paver joints, leading to shifting over time. We adjust pressure and nozzle angle to the specific material, then re-sand paver joints if washing has displaced the base, which is a step often skipped by generic pressure washing crews.
Matching the method to the material also protects the cage frame itself. Aluminum framing can be soft washed safely, but harsh pressure aimed at corner joints and screws can loosen fasteners over time, which is the same hardware our painting crews later rely on for a clean paint job if a homeowner also has their cage repainted.
Process and Timeline
- We schedule a walk-around to assess screens, decking, roof and siding before any water is applied.
- Pools, plants and outdoor furniture are covered or moved as needed.
- Screens and siding are soft washed at low pressure with the appropriate cleaning solution.
- Driveways, walkways and pool decks are cleaned at higher pressure suited to concrete or pavers.
- Paver joints are re-sanded if needed, and all surfaces are rinsed clean.
- A final walk-through confirms the work before the crew leaves.
Most Martin County homes are completed in a single day, with larger properties or combined roof and paver work sometimes extending into a second day.
Communities We Serve in Martin County
Pressure Washing throughout Martin County, including Palm City, Stuart, Hobe Sound, Jensen Beach, Port Salerno, Indiantown, North River Shores, Sewall’s Point, Jupiter Island, Ocean Breeze.
Martin County Pressure Washing FAQ
How often should pool cages and decks be pressure washed in Martin County's climate?
Most homes near the coast and along the St. Lucie River benefit from a wash every 12 to 18 months, since salt air, humidity and heavy rain seasons encourage algae and mildew to build up on screens, decks and panel sections. Homes further inland around Indiantown can sometimes stretch a bit longer between cleanings, but a cage that is visibly dull or streaked is due regardless of the calendar.
Will pressure washing damage my pool screens or weaken the mesh?
Full pressure directed at screen mesh can tear it or push it out of the spline, so screens are cleaned with low-pressure rinsing and the appropriate cleaning solution rather than a wand turned up high. Aluminum frames, pool decks and masonry can take more pressure, and we adjust equipment and distance surface by surface.
Can you pressure wash pavers and driveways without stripping the sand joints?
Yes, we use a controlled pressure and fan tip pattern suited to paver joints, and we check the sand level before and after cleaning. If joints look thin or washed out from prior cleanings, we can discuss re-sanding as part of the visit.
Do you need access inside my pool enclosure or through a locked gate?
In most cases yes, since the inside of the screen panels, cage framing and pool deck all get cleaned as part of a standard job. If you have a locked gate or a gate code, letting us know ahead of the scheduled visit keeps the route on time.
Is soft washing different from pressure washing, and which does my roof need?
Soft washing uses low pressure with a cleaning solution formulated to kill algae and mildew at the root, which is the correct method for roofs, stucco and painted siding that could be damaged by high pressure. Pressure washing with higher force is reserved for hard surfaces like concrete, pavers and pool decks that can tolerate it.
Do you coordinate with HOA rules in communities like Sewall's Point or Palm City before starting work?
Yes, many communities in Martin County have guidelines on service hours, parking, or notice to neighbors, and we work around those requirements once we know the property's HOA or deed restrictions. If your community requires a vendor form or advance notice, let us know when scheduling and we will plan the visit accordingly.
More Pool Cage Services in Martin County
Beyond pressure washing, we also handle full pool cage painting for homeowners throughout Martin County. Pool Cage Painting.
Nearby Areas We Also Serve
Crews routing through Martin County also take on nearby pressure washing and cage projects along the Treasure Coast as schedules allow. Seminole County, Orange County, Brevard County, Indian River County, Volusia County and St. Lucie County.
Statewide details, colors and the full process are on our main pressure washing page.
Recent Work



Request a Martin County Estimate
Send a few photos of the cage, deck, driveway or roof you want cleaned along with the property address in Martin County, and we will reply with a written estimate. For questions in the meantime, you can reach us at (941) 320-2858.
Last reviewed: November 6, 2026