Pool Cage Rescreening in Orange County
We rescreen pool cages for homeowners throughout Orange County, replacing torn or sun-brittled screen panels with materials suited to Central Florida sun and storms.
- Free Written Estimate
- Fast Scheduling
- Built for Florida Weather
- Licensed & Insured
- BBB A+ Rated
- 150,000+ Customers Served
- 283+ 5-Star Reviews
Request Your Free Estimate
Request a free written estimate for your pool cage rescreen.
- Free No-Obligation Estimate
- Fast Response Times
- No Pressure Consultation
Orange County’s roughly 1,044,000 residents live under some of the state’s most intense sun exposure, and pool cages here take a steady beating from UV rays, afternoon thunderstorms, and the occasional tropical system. Screen mesh that looked fine two summers ago often shows pinholes, brittleness, or sagging by the time homeowners call us, especially on east- and west-facing panels that catch the most direct light.
Our crews route through Orange County on a rotating schedule, covering everything from older ranch homes in Pine Hills and Oak Ridge to newer construction in Horizon West and Winter Garden. Cage styles vary widely across the county, from simple flat-roof enclosures to tall pool cages over lanais in Alafaya and Meadow Woods, and we size up screen gauge, panel count, and frame condition before quoting any job.
Screen Wear Across Orange County Communities
Housing stock varies widely across the county, and that affects screen condition. Older lanais in established Orlando neighborhoods and parts of Pine Hills often carry original mesh from a prior decade, while newer construction in Horizon West and parts of Ocoee tends to have screens installed within the past several years but already showing UV stress from unshaded, open lot exposure.
Winter Park’s mature tree canopy offers some relief from direct sun, which can extend screen life on shaded panels, but falling leaves, oak pollen, and branch debris create their own wear patterns and occasional tears. In Apopka and Meadow Woods, where cages often sit in open, sun-exposed yards, mesh tends to turn brittle faster and needs closer inspection after each hurricane season.
Alafaya and Oak Ridge see a mix of attached-home communities with shared sightlines, where HOA boards often expect uniform screen color and panel condition across adjoining lanais. Winter Garden’s lakeside properties add another variable, since humidity and wind off the water accelerate spline deterioration even when the mesh itself still looks intact.
How We Rescreen a Pool Cage
Every rescreening job starts with a walk-around inspection of the cage frame, panel by panel, checking for bowed framing, rusted fasteners, or spots where the aluminum has pulled away from anchors. We note which panels need full mesh replacement versus spot repair, then measure each opening individually since panel sizes on older Orange County cages are rarely uniform.
Old screen and spline are removed and the channel is cleaned out before new mesh is cut and rolled in. We typically use standard charcoal fiberglass mesh, though homeowners near open yards in Apopka or Horizon West sometimes choose heavier gauge or pet-resistant mesh for added durability. Panels are rescreened in sequence so the cage stays weather-protected throughout the day.
Once all panels are set, we check tension, trim excess material, and clear the work site of old screen scraps and spline offcuts. A final walkthrough confirms every panel is tight and properly seated before we leave. Most rescreening projects, depending on cage size and panel count, take one to three days to complete.
- Frame and fastener inspection before any mesh is removed
- Individual panel measurement rather than uniform sizing
- Mesh options including standard and heavier-gauge screen
- Sequential panel work to limit cage downtime
- Full site cleanup of old screen and spline material
Scheduling, Access, and HOA Approval
Most rescreening jobs in Orange County take one to three days depending on cage size and panel count, but scheduling around gate access and yard conditions matters just as much as the work itself. Pool cages behind locked side gates, through narrow side yards in older Orlando neighborhoods, or across staged construction zones in newer Horizon West developments all require a quick access check before crews arrive, so the route can be planned without delays.
Many communities across the county, from established Winter Park subdivisions to newer deed-restricted neighborhoods in Ocoee and Winter Garden, have HOA guidelines that govern screen color, mesh darkness, or frame finish. Some associations require written approval before rescreening begins, particularly for cages visible from the street or adjoining golf courses. We can provide documentation of mesh specifications and frame details homeowners need to submit for approval, which helps avoid delays once work is scheduled.
- Confirm gate width and yard access ahead of the scheduled day
- Check HOA architectural guidelines for approved screen colors and mesh types
- Allow extra lead time if written HOA approval is required
- Coordinate pet or pool access needs with the crew in advance
Why Rescreening Timing and Mesh Choice Matter
A common mistake is patching torn panels repeatedly instead of rescreening once wear becomes widespread. Patched sections rarely match surrounding screen tension, and once three or four panels have been individually repaired, the cage is usually a better candidate for full rescreening than continued spot fixes, especially with Central Florida’s UV exposure accelerating mesh brittleness between patches.
Mesh density is another area where homeowners sometimes choose incorrectly. Standard 18×14 fiberglass mesh suits most residential pools, but homes near wooded areas in Apopka or Alafaya may benefit from heavier mesh or solar screen options that reduce debris and glare. Choosing mesh based on appearance alone, without considering sun exposure or nearby tree cover, often leads to earlier replacement.
Frame corrosion is frequently overlooked until rescreening begins. Aluminum frames near enclosed pools can develop corrosion at fastener points or where panels meet the frame track, particularly in homes closer to the Econlockhatchee or Shingle Creek floodplains with higher ambient humidity. Rescreening over corroded framing shortens the life of new screen, so addressing frame condition first is part of a proper job.
Process and Timeline
- Schedule a free written estimate and confirm yard or gate access details
- Inspect the full frame for corrosion, bowing, or track damage before ordering mesh
- Select mesh type and density based on sun exposure, debris, and any HOA requirements
- Remove old screening panel by panel and clean the spline channels
- Install new mesh with fresh spline, trimming and tensioning each panel
- Final walk-through to check panel tension and frame condition with the homeowner
Most rescreening projects in Orange County are completed in one to three days depending on cage size and mesh selection.
Communities We Serve in Orange County
Pool Cage Rescreening throughout Orange County, including Orlando, Alafaya, Pine Hills, Horizon West, Apopka, Ocoee, Winter Garden, Meadow Woods, Winter Park, Oak Ridge, Hunters Creek, Maitland, Southchase, Lake Butler, Azalea Park, Lockhart, Conway, Goldenrod, Doctor Phillips, Pine Castle, Fairview Shores, Union Park, Bithlo, Wedgefield, Williamsburg, Sky Lake, Belle Isle, Orlovista, Rio Pinar, Bay Hill, Holden Heights, Holden Lakes, Oakland, Clarcona, Tangerine, Windermere, Zellwood, Edgewood, Tangelo Park, Christmas, Eatonville, Taft, Gotha, Lake Mary Jane, Killarney, Lake Nona, Plymouth.
Orange County Pool Cage Rescreening FAQ
How long does it take to rescreen a pool cage in Orange County?
Most pool cages are rescreened in a single day, with larger lanais or two-story screen enclosures sometimes running into a second day. Crews route through Orange County by neighborhood, so scheduling the visit around your gate access and pool equipment location helps keep the job on that timeline.
What screen mesh is best for Central Florida sun and pollen?
Standard charcoal fiberglass screen is the common choice for pool cages here, offering good airflow and visibility at a reasonable cost. For homes near Winter Garden citrus groves or heavily wooded lots around Winter Park, a solar or pet-resistant mesh can hold up better against pollen buildup and daily UV exposure.
Do I need HOA approval to rescreen my pool cage in my community?
Many planned communities in Horizon West, Alafaya, and similar deed-restricted neighborhoods require an architectural review before rescreening, especially if you are changing mesh color or panel pattern. We can provide spec sheets and photos to include with your HOA submission if your community requires one.
Can you repair a few damaged panels instead of rescreening the whole cage?
Yes, individual torn or sagging panels can be rescreened on their own without redoing the entire enclosure. This is common after isolated storm damage or tree limb contact, and it is usually the more practical option when the rest of the screen is still in good condition.
Will rescreening fix a sagging or bowed pool cage frame?
No, rescreening only replaces the screen material, not the aluminum frame itself. If panels are bowed or spreaders are bent, the frame needs to be straightened or reinforced before new screen is installed, otherwise the new material will stretch unevenly in the same spots.
How soon after a storm should I have torn screens replaced?
It is worth having torn screens assessed within a week or two, since open panels let debris, rain, and pests into the pool area and can stress the frame further in follow-up winds. After larger storms that affect much of Central Florida, scheduling can take longer, so earlier calls tend to get earlier slots.
More Pool Cage Services in Orange County
Beyond rescreening, Orange County homeowners also call on us for pool cage painting and pressure washing. Pool Cage Painting and Pressure Washing.
Nearby Areas We Also Serve
Crews routing through Orange County also cover the surrounding Central Florida communities nearby. Indian River County and Polk County.
Statewide details, colors and the full process are on our main pool cage rescreening page.
Recent Work
Request an Orange County Estimate
Send a few photos of your pool cage along with the property address in Orange County, and we will reply with a written estimate for the rescreening work. For questions in the meantime, you can reach us directly at (941) 320-2858.
Last reviewed: November 6, 2026